Transportation and mobile energy storage systems should meet the following conditions:
⚫ The doors of each cabinet of the energy storage system are locked tightly, and there are no
foreign objects sticking out of the box.
⚫ According to the site conditions, choose the appropriate forklift, tools, the tools used must
meet the energy storage system handling requirements.
⚫ Be sure to set up warning signs or warning belts when handling to avoid non-staff entering
the operation and transport area to avoid accidents.
⚫ In case of bad weather conditions, such as heavy rain, fog, strong wind, etc., the operation
should be stopped.
⚫ Before using the forklift, you should make sure that the forklift meets the load-bearing
requirements: the load-bearing capacity needs to be ≥4t.
⚫ Recommended fork blade length ≥1.4m, width 80cm~160cm, thickness 25cm~70cm.
⚫ Forklift lifting height requirements: when the height of the foundation is ≤0.3m, the lifting
height is ≥2m; when the height of the foundation is >0.3m, the lifting height is increased accordingly.
Figure 3.1 Forklift transport front side
To Next Page
Loading...