⚫ A person who has received professional training related to the installation and commissioning
of electrical equipment and who is able to be aware of the various potential sources of hazards and
the magnitude of the hazards during the installation, operation, and maintenance of the equipment.
⚫ Should have some electronic, electrical wiring and mechanical expertise and be familiar with
electrical and mechanical schematics.
⚫ Emergency response capability should be available in the event of a hazardous or unexpected
situation during installation or commissioning.
⚫ Personnel in special scenarios such as electrical operations, work at heights, and operation
of special equipment must have special operating qualifications required by the local country/region.
⚫ Operators of medium voltage equipment must hold a high voltage electrician's licence.
⚫ Keep persons other than those operating the equipment away from the equipment.
⚫ The installation process is strictly prohibited to operate with electricity. It is prohibited to
install or remove cables with electricity. The wire and cable cores will generate electric arc, electric
spark or fire and explosion at the moment of contacting the conductor, which can lead to fire or
personal injury.
⚫ When equipment is energized, unregulated and incorrect operation may produce a fire,
electric shock or explosion, resulting in injury, death or property damage.
⚫ It is strictly prohibited to wear watches, bracelets, bangles, rings, necklaces and other easily
conductive objects during operation to avoid electric shock burns.
⚫ Special insulated tools must be used during operation to avoid electric shock or short-circuit
faults, and the insulation voltage withstand level must meet the requirements of local laws and
regulations, standards and codes.
⚫ Do not deactivate equipment protection devices and ignore warnings, cautions and
precautions in manuals and on equipment.
⚫ During the operation of the equipment, if a fault is detected that may lead to personal injury
or equipment damage, the operation should be terminated immediately, reported to the person in
charge, and effective protective measures should be taken.
⚫ Do not power up the unit without completing the installation or without professional
confirmation.
To Next Page
Loading...