PowerMagic 400V C&I Energy Storage System User Manual
⚫ Lethal high voltage is present inside the equipment!
⚫ Observe and comply with the warning signs on the equipment.
⚫ Observe the safety precautions listed in this manual and other relevant documents for this
equipment.
⚫ Observe the relevant protective requirements and precautions for batteries.
⚫ There is a risk of electric shock from touching the power supply or the contacts, terminals,
etc. connected to it inside the equipment!
⚫ Special protective equipment must be used during operation, such as protective clothing,
insulated shoes, goggles, safety helmets and insulated gloves.
⚫ Always use the energy storage system in accordance with this manual.
⚫ To prevent accidents, observe the following precautions:
⚫ In the vicinity of the energy storage system, place visible warning signs to prevent
accidents caused by misclosing.
⚫ In the vicinity of the equipment, erect warning signage or set up safety caution tape.
⚫ The indicator light of the equipment should be evacuated from the scene when the red
light is flashing.
The lifting and transportation, installation and wiring, operation and maintenance of energy
storage system must be carried out by professional and technical personnel in accordance with local
norms. Operators responsible for the installation and maintenance of equipment need to meet the
following requirements:
⚫ You must first undergo rigorous training, master the correct operation method, be familiar
with the composition and working principle of the energy storage system and its front and rear
equipment, and understand the various safety precautions and the relevant standards of your
country/region.
To Next Page
Loading...