⚫ Liquid and electricity separation design
The DC cables of the system is designed on the top of the cabinets and the pipes for the liquid
cooling system is at the bottom of the cabinets. Through this design scheme, the potential risks of
electrical connection safety problems caused by the leakage of cooling liquid is eliminated, which can
greatly improve the safety and reliability of the system.
⚫ 3 + 2 Safety Design
‘3’ refers to the 3 levels of fire supression in PowerMagic.
The first level is pack level perfluorohexanone gas fire fighting.
The second level refers to the cabinet level + auxiliary box level perfluorohexanone gas fire
fighting.
The third level refers to water fire fighting.
‘2’ refers to the explosion vent design and combustible gas emissions design.
Note: Overseas versions can be fitted with optional aerosol solutions according to customer
requirements.
⚫ Compatible with larger cell design
Without changing the cabinet structure, PowerMagic can upgrade the 280Ah cell to the 320Ah
cell, further improving the energy density.
⚫ Liquid cooling + Anti-condensation system
The liquid cooling system of PowerMagic can effectively solve the problems of temperature
unbalance, short life and low efficiency among the batteries. By adding the anti-condensation device,
the dew point temperature can be effectively reduced to lower the condensation possibility..
⚫ Auto gird on/off
PowerMagic energy storage system can meet the fast on-grid and off-grid auto-switching
requirements.
⚫ Local EMS Features:
To Next Page
Loading...