Figure 4.15 Schematic diagram of the steel base
Step 2
Use expansion bolts to fix the steel base with the cement floor. If the parallel cabinet scheme of
n (n value is 1, "n" indicates the number of energy storage cabinets) + m (m value is 1~3, "m" indicates
the number of battery cabinets) is adopted, it is preferred to fix the steel base for extra battery cabinet
and level it before carry out the overall cabinet lifting operation.
Step 3
Use the bolts to fix the energy storage cabinet, the battery cabinet and the steel base firmly.
Step 4
Remove the sealing plate and block the front and back of the equipment base.
To Next Page
Loading...