Sojet ELFIN IH - 5.5.6 System Reset

28
5.5.6 System Reset
Click on tools
management interface to enter system
reset management (see Figure 48).
Click to execute system
reset. You need to enter administrator
password for permission to reset
execution (see Figure 49).
(Figure 48)
(Figure 49)
Note: System reset is to restore all defaults.
1) Restore all the settings to defaults, clear all data and images.
2) Maintain software version in current version; restore language and font to default.
After system reset, system parameters are as follows:
Item #
Item
Parameter
1
Language
English
2
System time
Manufacture time
3
Screen saver time
5 minutes
4
Unit
Metric/mm
5
Daylight saving time
OFF
6
Customer year
OFF
7
Date transition time setting
OFF
8
Pre-zero in date/time
OFF
9
Pre-zero in counter
OFF
10
Counter alarm
OFF
11
Counter reset
OFF
12
Pre-purge
OFF
13
Clean printhead
Standby
14
Printing direction
Left-to-right
15
Channel switch
Left channel
16
Print Recovery
OFF
17
Line speed
30m/min
18
DPI
300DPI
19
User permission management
OFF
20
Continuous output times
0 OFF
21
Data management
Only system default data Msg001
22
Printing delay
30mm
23
Printing initial value
Counter initial value and data source current value.