12 Copyright © 2025 Sol-Ark LLC
Connecting Batteries
When creating a custom RJ45 cable, use a CAT5/CAT6, also known as ethernet cable. Unless otherwise
stated, cut open the cable and cut off the unnecessary wires.
Most custom cables are NOT reversible; therefore, keep track of which end of the custom cable connects
to the battery and the Sol-Ark.
If you’re crimping new connectors to create a cable, be careful not to over-tighten the crimping
tool, as this can recess the connectors and lead to a poor or intermittent connection.
To Next Page
Loading...
