14 Copyright © 2025 Sol-Ark LLC
Briggs & Stratton AmpliPHI 3.8 and
SimpliPHI™ 6.6 Energy Storage System (ESS)
Follow these instructions for setting up Briggs&Stratton batteries and Sol-Ark inverters.
Be sure to consult the comprehensive technical documentation provided by Briggs&Stratton for
specifications and settings to ensure optimal performance and safety. Visit the manufacturer’s website
and consult the relevant documentation below.
Briggs & Stratton Installation Manual
Communications Installation and Setup Instructions
Custom RJ45 cable
No custom cable is needed.
Battery IDs and connections
1. Connect all batteries using the included RJ45 cables, using the two ports nearest to each other to
bridge the batteries together (GREEN in the picture below).
2. Use the included 120 Ohm terminators on both ends of the resulting chain.
To Next Page
Loading...
