SolarEdge SE6000H User Manual

EV Charging Safety Instructions
WARNING!
Do not charge a vehicle indoors if it requires ventilation. Contact your EV service
representative for information.
WARNING!
Automatic CCID (charge circuit interrupting device) reset provided.
WARNING!
Risk of electric shock. Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION!
Do not use this product if there is any damage to the unit.
CAUTION!
Do not use an extension cord between the SolarEdge EV Charger Cable and the
EV Charging Single Phase Inverter. You may use a conversion adapter only if it
has been approved by SolarEdge.
NOTE
This product is intended for use with electric vehicles, however it operates as a
PV inverter also when no charging cable is connected.
EV Charging Single Phase Inverter Guide MAN-01-00583-1.5
14 EV Charging Safety Instructions

SolarEdge SE6000H Specifications

General

Model	SE6000H
Manufacturer	SolarEdge
AC Output Power	6000 W
Rated AC Power	6000 W
Cooling	Natural Convection
Noise Level	< 25 dBA
Topology	Transformerless
Number of MPP Trackers	1
Warranty	12 years
Max. Input Voltage	480 V
MPPT Voltage Range	380 - 480 V
Operating Temperature Range	-25°C to 60°C
Dimensions	450 x 370 x 174 mm
Weight	23.6 lbs (10.7 kg)
AC Voltage	208/240 V