What to do if SolarEdge Inverter displays 'Ground Disconnected Disconnect from EV'?
If the SolarEdge Inverter shows 'Ground Disconnected Disconnect from EV', disconnect the EV Charger cable from the vehicle.
What to do if SolarEdge Inverter shows 'Internal Error Disconnect from EV'?
If your SolarEdge Inverter displays the message 'Internal Error Disconnect from EV', disconnect the EV Charger cable from the vehicle. Then, turn the inverter AC circuit breaker OFF and then ON again. Finally, reconnect the EV Charger Cable to the vehicle.
Why does my SolarEdge SE6000H display 'Vent not supported Disconnect from EV'?
If your SolarEdge Inverter displays 'Vent not supported Disconnect from EV', the vehicle cannot be charged, because the SolarEdge EV charger does not charge vehicles that require ventilation while charging.
What to do if SolarEdge SE6000H shows 'Charging retries ended Disconnect from EV'?
If your SolarEdge Inverter displays 'Charging retries ended Disconnect from EV', disconnect the EV Charger cable from the vehicle and contact SolarEdge Support.
What causes 'Pairing failed' on SolarEdge SE6000H and how to fix it?
If your SolarEdge Inverter displays 'Pairing failed', it means power optimizers are shaded. If you connected the inverter to the monitoring platform, retry pairing remotely (during sunlight). Make sure to leave the inverter ON/OFF/P switch ON and that S_OK appears in the status screen.
What does 'Ground Fault (RCD) Press Charge Now' mean on SolarEdge SE6000H Inverter?
If your SolarEdge Inverter displays 'Ground Fault (RCD) Press Charge Now', it means the EV Charger detected a ground fault. Press the Charge Now pushbutton on the Connection Unit.
What does 'Internal Error Disconnect from EV' mean on SolarEdge Inverter?
If your SolarEdge Inverter displays 'Internal Error Disconnect from EV', it means there is an internal error. Disconnect the EV Charger cable from the vehicle. Turn the inverter AC circuit breaker OFF and ON. Reconnect the EV Charger Cable to the vehicle.
What to do if SolarEdge Inverter displays 'Over Voltage Press Charge Now'?
If your SolarEdge Inverter displays 'Over Voltage Press Charge Now' it is because the EV Charger AC voltage is too high. Press the Charge Now pushbutton on the Connection Unit or tap Charge Now on the EV Charger tab of the Monitoring App.
What does 'Over Current Press Charge Now' mean on SolarEdge Inverter?
If your SolarEdge Inverter displays 'Over Current Press Charge Now' it is caused by EV Charger AC over current. Press the Charge Now pushbutton on the Connection Unit or tap Charge Now on the EV Charger tab of the Monitoring App.
How to fix 'String voltage is 0V' on SolarEdge SE6000H Inverter?
If your SolarEdge Inverter displays 'String voltage is 0V', it means a power optimizer output is disconnected. Connect all power optimizer outputs.
Covers essential precautions when using electrical products and handling the unit, including warnings.
Details warnings regarding inverter cover, PV panels, grounding, SafeDC voltage, and handling heavy objects.
Covers safety precautions, connector compatibility, and general installation guidelines for power optimizers.
Provides instructions for connecting the AC grid, grounding, and handling AC wires.
Guides through activating the installation and initial system setup via the SetApp mobile application.
Details power control options and steps to verify proper system activation and operation.
Explains how to identify system errors using inverter LEDs and the monitoring platform interface.
Provides troubleshooting steps for EV charger errors and various communication issues.
Lists detailed electrical and installation specifications for the EV Charging Single Phase Inverter models.
General| Model | SE6000H |
|---|---|
| Manufacturer | SolarEdge |
| AC Output Power | 6000 W |
| Rated AC Power | 6000 W |
| Cooling | Natural Convection |
| Noise Level | < 25 dBA |
| Topology | Transformerless |
| Number of MPP Trackers | 1 |
| Warranty | 12 years |
| Max. Input Voltage | 480 V |
| MPPT Voltage Range | 380 - 480 V |
| Operating Temperature Range | -25°C to 60°C |
| Dimensions | 450 x 370 x 174 mm |
| Weight | 23.6 lbs (10.7 kg) |
| AC Voltage | 208/240 V |
To Next Page
