Chapter 7: StorEdge Inverter Connections
Connect the system components to the StorEdge Connection Unit as described in this
chapter.
NOTE
The conduits, hubs and fittings must be suited for field wiring systems.
The hubs and other fittings must comply with UL514B.
Use the conduit and wiring appropriate for the installation location per the
NEC.
Outdoor installations must use components that are rated NEMA 3R or
higher.
StorEdge Solution with Backup MAN-01-00262-1.5
56 Chapter 7: StorEdge Inverter Connections
To Next Page
Loading...
