Introduction 7828 Density Transmitter Technical Manual
1-4 78285000_AB
1.2 7828 OPTIONS
A number of options are available for the 7828. They are identified by suffixes appended
to the transmitter type number. The table below summarises these. Some of the suffixes
are allocated to future developments and the letter code is currently fixed.
Part number
7828 * * A * A * L * B * *
Wetted parts: materials and finish
Stem + connections Tines Finish
316 Stainless Steel 316 Stainless Steel Standard
A
316 Stainless Steel 316 Stainless Steel Electro-polished C
316 Stainless Steel 316 Stainless Steel PTFE laminated F
Hastelloy C22 Hastelloy C22 Standard E
Hastelloy C22 Hastelloy C22 Electro-polished D
Hastelloy C22 Hastelloy C22 PTFE laminated G
Monel 400 Monel 400 Standard H
Monel 400 Monel 400 Electro-polished J
Monel 400 Monel 400 PTFE laminated
L
Special Special Special
S
Sensor electronics
Standalone (on-node): 4-20mA
BASEEFA EEx d IIC T4
C
Process connections
2" ANSI 150RF A
2" ANSI 300RF B
2" ANSI 600RF C
2" ANSI 900RF D
2" ANSI 1200RF E
2" ANSI 1500RF F
50mm DIN 2527 RF DN50/PN40
G
50mm DIN 2527 RF DN50/PN100
H
2" Ladish Triclamp (Hygienic)
J
3" Ladish Triclamp (Hygienic)
K
2" IDF (Hygienic)
L
3" IDF (Hygienic)
M
40mm Cone seat compression fitting
N
Special S
Factory Configuration
Line density A
API Base density B
Matrix base density C
Factory Calibration type
Free stream
A
2" boundary (Sch 40)
B
3" boundary (Sch 40)
C
Special
S
Traceability
None A
Certificate of materials traceability X
Manufacturing status
Factory determined
To Next Page
Loading...