Safety
09
2.2 Explanation of Symbols
This section gives an explanation of all the symbols shown on the inverter
and on the type label.
■ Symbols on the Inverter
■ Symbols on the Type Label
Symbols Explanation
Operating Display
Battery status
An error has occurred, inform your installer immediately.
Symbols Explanation
CE mark.
The inverter complies with the requirements of the applica-
ble CE guidelines.
UKCA mark.
The inverter complies with the requirements of the applica-
ble UKCA guidelines.
Observe enclosed documentation.
TUV certied.
RCM remark
Beware of hot surface.
The inverter can become hot during operation. Avoid con-
tact during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
The inverter can not be disposed together with the house-
hold waste. Disposal information can be found in the en-
closed documentation.
Do not operate this inverter until it is isolated from battery,
mains and on-site PV generation suppliers.
Danger to life due to high voltage.
There is residual voltage existing in the inverter after power-
ing o, which needs 5 min to discharge.
Wait 5 min before you open the upper lid or the DC lid.
To Next Page
Loading...
