SolaX Power X1-Hybrid-LV Series - Grid Port and EPS Output Connection

Electrical Connections
39
The series inverters have an integrated EPS (Emergency Power Supply) func-
tion. When the grid is connected, the inverter outputs ows through the Grid
port, and when the grid is disconnected, the inverter outputs ows through the
EPS port.
Please refer to 3.2 System Diagram for wiring information.
To be compatible with all loads, you will need additional accessories. Please
Refer to 5.4.2 Additionally required materials. If you need a solution, please
contact our sales.
The series inverter are single-phase inverter. Suitable for rated voltage
220/230/240V, frequency 50/60Hz. For more technical requirments, consult
the requirements of the local public grid.
6.2 Grid, GEN and EPS Output Connection
The circuit breaker should be installed between the inverter and the mains,
and the load should not be directly connected to the inverter.
Figure: Wrong connection of load and inverter