SolaX Power X1-Hybrid-LV Series - Additionally Required Materials

Installation
30
No. Required Material Type
Conductor Cross-
section
1 PV cable
Dedicated PV wire
withstand voltage 600 V
4 mm²
2 Communication cable Network cable CAT5 0.2 mm²
3 Additional PE cable
Conventional yellow and
green wire
4 mm²-6 mm²
4 Battery power cable
Conventional copper
wire
16-25mm² or 35-50
mm²
5.4.2 Additionally required materials
Grid cable and micro-breaker recommended
:
EPS cable and micro-breaker recommended:
Model
X1-HYB-
3.0-LV
X1-HYB-
3.7-LV
X1-HYB-
4.0-LV
X1-HYB-
4.6-LV
X1-HYB-
5.0-LV
X1-HYB-
6.0-LV
Cable(copper) 4-6 mm² 6-8 mm² 6-8 mm² 8-10 mm² 8-10 mm² 8-10 mm²
Micro-Breaker 32A 40A 40A 50A 50A 50A
Model
X1-HYB-
3.0-LV
X1-HYB-
3.7-LV
X1-HYB-
4.0-LV
X1-HYB-
4.6-LV
X1-HYB-
5.0-LV
X1-HYB-
6.0-LV
Cable(copper) 3-4 mm² 3-4 mm² 3-4 mm² 4-6 mm² 4-6 mm² 6-8 mm²
Micro-Breaker 25A 25A 25A 32A 32A 40A
GEN cable and micro-breaker recommended:
Model
X1-HYB-
3.0-LV
X1-HYB-
3.7-LV
X1-HYB-
4.0-LV
X1-HYB-
4.6-LV
X1-HYB-
5.0-LV
X1-HYB-
6.0-LV
Cable(copper) 3-4 mm 3-4 mm 3-4 mm 4-6 mm 4-6 mm 6-8 mm
Micro-Breaker 25A 25A 25A 32A 32A 40A