SolaX Power X1-Hybrid-LV Series - Battery Temperature Sensor Connection

To Next Page

To Previous Page

Electrical Connections

6.3.2 Battery temperature sensor connection

Lead-acid battery

Non-polar

DC MCB

Power line connection

Temperature sensor connection

■ Battery temperature sensor connection diagram

■ Battery temperature sensor connection steps

Step 1. Find the battery temperature sensor in the accessory bag.

Step 2. Disassemble the swivel nut on COM1/2/3. Pass tthe battery temper-

ature sensor through the COM port and insert the RJ45 connector of the bat-

tery temperature sensor into the BMS port located inside the inverter. You can

select any port from COM1/2/3.

Step 3. Attach the terminal at the other end to the lead-acid battery in order

to measure the battery temperature.

BMS

Lead-acid

battery

Other manuals for SolaX Power X1-Hybrid-LV Series