Installation
28
The ingress protection level of the series inverters is IP65, so that the inverter
can be installed outdoors.
Check the installation environment and pay attention to the following condi-
tions when installing:
Do not install on ammable construction materials.
Do not install in proximity of ammable and explosive gases or liquids (e.g.
where chemicals are stored).
Do not install in proximity of TV antennas or cables.
Do not place in areas above 3000 meters above sea level.
Do not install in areas directly exposed to precipitation, which may cause cor-
rosion or damage Internal devices.
Keep the system out of reach of children.
If the inverter is installed in a narrow area, be sure to reserve appropriate
space for heat dissipation.
The ambient temperature of the installation should be between -25°C ~ 60°C.
Avoid exposing the equipment to strong light, direct rain, and snow accumula-
tion.
5.3 Installation Precautions
IP65
No direct sunlight
Near combustibles
Direct Sunlight Rain Exposure
Snow Lay up
Near antenna
No Rain Exposure
No snow Lay up
-25
℃
-+60
℃
0-100%RH
To Next Page
Loading...
