Installation
31
Install the inverter on a solid object that can withstand the weight require-
ments of the inverter and energy storage system.
Be careful not to install the inverter in the plasterboard wall or similar to the
residential places with poor sound insulation, so as not to work with noise and
interfere with the residents' life in the morning.
Install the inverter at a maximum back tilt of 15 degrees, the inverter can not
be tilted forward, installed upside down, excessively back tilted or side tilted.
5.5 Installation Site Conditions
5.5.1 Installation Carrier Requirements
5.5.2 Installation Angle Requirements
15°
To Next Page
Loading...
