Setting
74
Surplus FIT
Backup mode
Priority FIT
PSVF
Self Consumption
Full FIT
■
Work Mode
For mode selection, there are 9 working modes to choose from. Please refer
to 3.3 Work mode for detailed explanation.
To select the three Pakistani modes, you need to enter advanced settings and
select "safety" as "Pakistan" rst. Check Advanced settings for details.
Note that the basic settings pages will be dierent when one of the three Pa-
kistan modes are selected. Please refer to the basic settings section on next
page for more details.
Work Mode
"Power On" indicates that the inverter is in working state, which is generally
the default state. "Power O" means that the inverter stops running and only
the LCD screen is turned on. To set power on or o, users could tap the se-
lection box and then press "
√
" to save the settings.
■
System ON/OFF
MKS mode
SBU mode
SUB mode
(Pakistani Safety)
(Pakistani Safety)
(Pakistani Safety)
(EPS Mode)
To Next Page
Loading...
