EasyManua.ls Logo

SOMFY ilmo2 50 WT - Tips and Recommendations for Use; Technical Data

SOMFY ilmo2 50 WT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Copyright © 2015 Somfy SAS. All rights reserved.
EN
Images not contractually binding
4. TIPS AND RECOMMENDATIONS FOR USE
Questions concerning the ilmo 50 WT?
Problems Possible causes Solutions
The roller shutter is not
operational.
The drive is hot. Wait for the motor to cool down.
5. TECHNICAL DATA
Power supply 230 V 50 Hz
Operating temperature - 20°C to + 60°C
Index protection rating IP 44
Electrical insulation Class I
Somfy hereby declares that the drive covered by these instructions, when marked for input voltage 230V 50Hz and used as
intended according to these instructions, is in compliance with the essential requirements of Directives 2006/42/EC and 2014/30/
EU. A declaration of conformity detailing standards and specifications used and stating all particulars for identification of the
drive, name and address of the person(s) authorised to compile the technical le and empowered to draw up the declaration
including place and date of issue can be found at the Internet address www.somfy.com/ce.

Table of Contents

Related product manuals