Sonic Air Systems Sonic 150 - 10 Warranty Policy

Page 44
10 Warranty Policy
Sonic Air Systems, Inc. (SAS) and its employees are proud of our products and are
committed to providing our customers with quality, engineered products.
Scope of Warranty: All SAS designed products are warranted against defects in SAS design, workmanship and
materials.
Warranty Period:
 Blower motor units are warranted for 18 months commencing on the invoice date from SAS
 Retro-kits and blower heads are warranted for 12 months commencing on the invoice date from SAS
 Repaired blower heads are warranted for 6 months commencing on the invoice date from SAS
 Accessories are warranted for 24 months commencing on the invoice date from SAS
Repairs Within the Scope of the Warranty: If a SAS designed product is defective and the
defect occurs during the warranty period, SAS will either repair or replace, whichever SAS
believes to be appropriate under the circumstances. SAS is not responsible for removal or
reinstallation of product or any incidental or consequential damages resulting from the defect,
removal, reinstallation, shipment, or otherwise.
Repairs Outside the Scope of the Warranty: Problems with SAS products can be due to faulty
installation, misapplication, inadequate maintenance, non-SAS additions or modifications, or
other problems not due to defects in SAS design, workmanship or materials. If SAS determines
the warranty consideration is not due to defects in SAS design, workmanship or materials, the
buyer will be responsible for the cost of any necessary repairs.
Procedure to Receive Warranty Service:
 Buyer obtains a written return authorization number from SAS
 The authorization number must be noted on the outside of the shipping container
 Buyer will ship F.O.B. destination freight prepaid to SAS factory
 Non-compliance to any of the above procedures, damage resulting from improper packaging, or product
exposed to a hazardous substance may result in SAS refusing shipment
 International buyer, please contact SAS for the nearest authorized warranty center
Warranty exclusions:
 Motors shall be warranted under the respective manufacturer’s policy
 Product with a tampered warranty seal
 Damage from fire, flood, theft, or vandalism
 Applications not approved by SAS which includes but not limited to product exposed to toxic, flammable,
corrosive or other hazardous substance
 Damage resulting from installation or operational error
 Damage resulting from transportation carrier
 Belts, filter elements, or other similar service items
 Blower heads not repaired by factory authorized personnel
No Other Warranties and Liability Limitation:
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER
WRITTEN, ORAL OR IMPLIED. SAS’ LIABILITY IN ALL CASES WILL BE LIMITED TO THE
REPLACEMENT PRICE OF ITS PRODUCT. AT NO TIME SHALL SAS BE LIABLE FOR ANY COSTS
TO THE BUYER FOR LABOR, TRANSPORTATION OR DOWNTIME RESULTING FROM EQUIPMENT
FAILURES BY SAS OR OUR SUPPLIERS.