Page 4
2 Initial Inspection
Upon receipt of your Sonic Air Centrifugal Blower, make sure that all components listed on
the packing slip are present. Check to see that the serial number on the blower housing
matches the packing slip (See Figure 4). Inspect the blower / motor to ensure that they are
mounted with the correct outlet position and that the motor is the correct horsepower,
voltage and enclosure. If you have any shortages, discrepancies, or shipping damage, please
call your Sonic Distributor or Sonic Air Systems immediately.
Figure 3 - Sonic Nameplate
The serial number of the blower identifies the blower model, pulley size, belt size, mounting
position, and the motor specifications. Please use this number for any correspondence with
the Sales / Customer Service Department at Sonic Air Systems.
Figure 4 – Blower Serial Number
To Next Page
Loading...