50
u
•
If
you select "96kHZ/24bit" when an AV
amplifier (receiver) that does not support 96 kHz
is
connected,
no
sound or a loud sound may
result.
• "48kHz/96kHz PCM"
is
not effective when
"Audio Output Priority"
is
set
to
"HDMI," "Multi
Channel Analog," or "Stereo Analog."
Audio
DRC
Selects
the
dynamic
range
(compression
level
of
the
sound)
setting
when
playing
a
BD
or
OVD
that
conforms
to
"Audio
ORC."
Auto Performs playback at the
--
dynamic range specified
by
the disc
(BD-ROM
only).
Other discs are played back
at the "Standard" level.
Standard Performs playback at a
compression level between
"TV
Mode"
and
"Wide
Range."
TV Mode
Sounds are compressed
heavily. Low sounds are
easier to hear.
Wide Range
No compression works. A
more dynamic sound is
produced.
u
• "Audio DRC"
is
effective only when playing
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio signals.
• When "Dolby Digital"
is
set
to
"Dolby Digital"
in
the "Audio Settings" setup (page 49), "Audio
DRC" has
no
effect
on
the audio output from the
DIGITAL OUT (OPTICAL/COAXIAL) jack.
However, this excludes the following cases.
- when "BD Audio Setting"
is
set
to
"Mix" when
playing a
BD.
- when "Audio Output Priority"
is
set to
"HDMI," "Multi Channel Analog," or "Stereo
Analog."
DownRlix'
Sets
the
downmix
method
of
multi-channel
to
two-channel
sound.
Dolby
Outputs the Dolby Surround
Surround (Pro Logic) signals in 2
channels. Select this when
connecting an audio device
that supports Dolby
Surround (Pro Logic).
Normal
Outputs audio signals
without Dolby Surround
(Pro Logic) effect. Select
this when connecting an
audio device that does not
support Dolby Surround
(Pro Logic).
U
"Downmix" has
no
effect on the bitstream audio
output from the DIGITAL OUT (OPTICAL/
COAXIAL)IHDMI OUT jack.
To Next Page
Loading...
