EasyManua.ls Logo

Sony BDP-S550 - System and Network Configuration; Network Connection and Settings

Sony BDP-S550
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Auto
Display
~
Network
Settings
54
On
Automatically displays
-
information
on
the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
Off
Displays information only
when you press DISPLAY.
S~rellnS~ver'/
The
screen saver image appears when you do
not use the player for more than
IS
minutes
while an on-screen display, such as the home
menu, is displayed on your
TV
screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
On
Turns
on
the screen saver
-
function.
Off
Turns off the function.
SoftWare-
UpdatQ
Notitl~at,on
/-
'-;...
~.
~
-;i'
-,
c.,
y;':
Informs you
of
newer software version
information. Network connections and
settings are required when using this function
(page 54).
On
Sets the playerto inform you
-
of
newer software version
information (page 42).
Off
Turns off the function.
Displays the
player's
software version
information and the
MAC
address.
Internet
Selti'ngs
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router
or
Wireless
LAN
router.
The
items that need to be set may differ,
depending on the Internet service provider
or
the router.
For
details, refer to the instruction
manuals that have been provided by your
Internet service provider
or
supplied with the
router.
1
Select
"Internet
Settings"
in
"Network
Settings,"
and
press
ENTER.
2
Select
"IP
Address
Acquisition,"
and
press
ENTER.
3
Select
an
item,
and
press
ENTER.
Use DHCP Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static
IP
Set the IP address
Address
manually according
to
your network
environment.
When
you select
"Use
DHCP"
If
you set
"DNS
Server Auto
Acquisition" to "Off," set the following
item:
-DNS
Server (Primary)/DNS Server
(Secondary)
When you select
"Use
Static IP
Address"
Set
the following items:
-IP
Address
- Subnet
Mask
- Default Gateway
-DNS
Server (Primary)/DNS Server
(Secondary)