Audio
(HDMI)
Dolby
Digital'
Lowers
the
audio
output
level to
prevent
sound
distortion.
•
OTS
48kHz/16bit
Outputs audio signals
of
96 kHz sampling as 48 kHz/
16
bit.
96kHz/24bit
Outputs audio signals
of
96
kHz sampling as 96 kHz/
24 bit. However, the signals
will be output as 48 kHz/
16
bit if the source
is
copy-
protected.
Selects
the
maximum
sampling
frequency
for
the
PCM
signals
output
from
the
DIGITAL
OUT
(OPTICAL/COAXIAL)
jack.
Downmix Converts to output Linear
PCM
PCM
signals. Select this
--
when connecting to an audio
device without a built-in
DTS decoder.
DTS
Select this when connecting
to an audio device with a
built-in DTS decoder.
Selects
the
audio
signals
output
when
playing
DTS
discs.
This
setting affects
the
output
from
the
DIGITAL
OUT
(COAXIAL/
OPTICAL)
jack.
Downmix Converts to output Linear
PCM
PCM signals. Select this
--
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
Selects
the
audio
signals
output
when
playing
Dolby
Digital discs.
This
setting affects
the
output
from
the
DIGITAL
OUT
(COAXIAL/OPTICAL)
jack.
On
Enables Audio Attenuation.
Off Disables Audio Attenuation.
-
-.
10
Aildlo'
Settllll,"
"
"Audio
AIT'
does not affect the output from
the
HDMI OUT jack and the DIGITAL OUT
(OPTICAL/COAXIAL) jack.
Mix
Outputs the audio obtained
-
by mixing the interactive
audio and secondary audio
to the primary audio.
Direct
Outputs the primary audio
only.
Selects
whether
to mix
or
not
mix
interactive
audio
and
secondary
audio
(commentary)
when
playing
a
SD
that
contains
such
audio.
"
PCM
96 kHz and
PCM
192
kHz audio signals are
output as
PCM
48
kHz audio signals when "BD
Audio Setting"
is
set
to
"Mix."
Auto Normally select this.
--
Outputs audio signals
according to the status
of
the
connected HOMI device.
2ch
PCM
oownmixes
to 2-channel
Linear
PCM
signals before
outputting from the HOMI
OUT
jack.
"
Select "2ch PCM" when connecting a
TV
or
an
AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise
or
no
sound
may
result.
Selects
the
signal
type
for
the
HDMI
OUT
jack.
-'continued
49
To Next Page
Loading...
