The
interactive
audio
is
not
output.
~
Set "BO Audio Setting" to "Mix" in the
"Audio Settings" setup (page 49).
HOM.
There
is
no
picture
or
no
sound
when
connected
to
the
HOMI
OUT
jack.
~
Try the following: G)Tum the player
off
and on again.
®Tum
the connected
equipment
off
and
on
again. @Oisconnect
and then reconnect the HOMI cable.
There
is
no
picture
or
picture
noise
appears
when
connected
to
the
HOMI
OUT
jack.
~
The HOMI
OUT
jack is connected to a OVI
device that does not support copyright
protection technology.
~
If
the HOMI OUTjack
is
used for video
output, changing the video output
resolution may solve the problem
(page 44).
No
sound
is
output
from
the
HOMI
OUT
jack.
~
The HOMI
OUT
jack
is
connected to a OVI
device (OVI jacks do not accept audio
signals).
The
sound
is
not
output
correctly
when
connected
to
the
HOMI
OUT
jack.
~
The device connected to the HOMI
OUT
jack
does not support the audio format
of
the player. Check the audio settings
(page 46).
The
display
language
on
the
screen
switches
automatically
when
connected
to
the
HOMI
OUT
jack.
~
When "Control for HOMI"
is
set to "On"
(page 53), the display language on the
screen automatically switches according to
the language setting
of
the connected TV (if
you change the setting on your TV, etc.).
The
"Control
for
HOMI"
function
does
not
work
(BRAVIA
Sync).
~
Check that the AC power cord
of
the
connected component
is
securely
connected.
~
If the HOMI indicator does not appear
in
the front panel display, check the HOMI
connection (page
15,
20).
~
Set "Control for HOMI" to "On" (page 53).
~
Make sure that the connected component is
compatible with the "Control for HOMI"
function. For details, refer to the operating
instructions supplied with the component.
~
Check the connected component's setting
for the "Control for HDMI" function. For
details, refer to the operating instructions
supplied with the component.
~
If
you change the HOMI connection, tum
the player
off
and on again.
~
If
power failure occurs, set "Control for
HOMI" to "Off," then set "Control for
HOMI" to
"On"
(page 53).
~
For details on the "Control for HOMI"
function, see "About the BRAVIA Sync
features (for HOMI connections only)"
(page 16).
~
If
you connect the playerto a TV through an
AV amplifier (receiver) that is not
compatible with the "Control for HOMI"
function, you may be unable to control the
TV
from the player.
The
external
memory
is
not
recognized.
~
Try the following: G)Turn the player off.
®Align
the T mark
of
the EXT slot with
the T mark on the external memory, and
insert the external memory (page 24).
@Tum
the player on.
0Check
that the
EXT indicator lights up
in
the front panel
display.
•
)II
Q,
Q,
::;:
S'
:=
II»
5"
-
o
3
II»
:::
o
:=
"'continued
59
To Next Page
Loading...
