Copying still images from a mini DV tape - Photo save
To stop or end copying
Press MENU.
When the memory of the "Memory Stick" is full
"MEMORY FULL" appears on tile LCD screen or in the viewfinder, and tile copying
stops. Insert another "Memo_T Stick" and repeat tile procedure Dora step 2.
Image size of still pictures
Image size is automatically set to 640 × 480.
When the access lamp is lit or flashing
Never sbake or strike your camcorder. As well do not turn tile power off, eject a
"Memory Stick" or remove the battery pack. Otherwise, the image data breakdown may
OCCL/F.
To record all the images recorded on the mini DV tape
Rewind tbe tape all tile way back and start copying.
If the write-protect tab on the "Memory Stick" is set to LOCK
"NOT READY" appears when you select the item in tile menu settings.
When you change "Memory Stick"s in the middle of copying
Your camcorder resumes copying flora tile last linage recorded on the previous
"Memory Stick."
112
To Next Page
