Searching the boundaries of recorded
tape by title - Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape hy title (Title search). Use the Remote Commander for this
operation.
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to ON in the menu settings (p. 85). Factory setting is
ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until tile TITLE
SEARCH indicator appears.
The indicator changes as IMlows:
TITLE SEARCH ---+DATE SEARCH ---+ PHOTO SEARCH ---+PHOTO SCAN
--+ no indicator
(4) Press _ or _ on the Remote Commander to select the title fbr playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
TITLE SEARCH
SEARCH _ HELLO!
CONGRATULATIONS!
MODE s HAPPY NEW YEAR!
4 PRESENT
GOOD MORNING
WED©ING
$
i®1 i
8
_r
©
5'
To stop searching
Pressm.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the _ / mark
• The bar in the _ mark indicates the present point on the tape.
• The _ mark in the [_ ............................I indicates the actual point you are hying to search.
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
To superimpose a title
See page 77.
49
To Next Page
Loading...
