Playing back a tape with digital effects
1
During playhack, you can process a scene using tile digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) Ill the playback/playback pause mode, press DIGITAL EFFECT and turn the
SEL/PUSH EXEC dial tmtil the desired digital effect indicator (STILL, FLASH,
LUMI. or TRAIL) flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital efDct indicator lights up and the bars appear. In the STILL or
LUMI. mode, the picture is captured and is stored in memory as a still picture
at the time you press the SEL/PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital eflect Ikmction, see page 38.
DIGITALEFFECT
STILL Imlml
To cancel the digital effect function
Press DIGITAL EFFECT again.
Notes
• You cannot process externally input scenes using the digital effect f\mction.
• To record pictures that you have processed using the digital eft)ct, record the pictures
on the VCR, using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect f\mction are not output thlough the P, DV IN/
OI IT jack.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect ftlllCtioi1 is automatically canceled.
46
To Next Page
