Searching for a photo - Photo search/Photo scan
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to OFF in the menu settings (p. 85).
(3) Press SEARCH MODE on tile Remote Conlillander repeatedly, until tile
PHOTO SEARCH indicator appears.
The indicator changes as follows:
DATE SEARCH ---+PHOTO SEARCH ---+PHOTO SCAN ---+no indicator
(4) Press _ or _ on the Remote Commander to select the photo for playback.
Each tilne you press _ or _, your camcorder searches for the previous or
next photo.
Your camcorder autoinatically starts playback of the photo.
To stop searching
Press m.
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE oil tile Remote Commander repeatedly, until tile
PHOTO SCAN indicator appears.
(3) Press _ or _ on the Remote Commander.
Each photo is played back for about five seconds autoinatically.
ID.
g
©
O
SEARCH
MODE
To stop scanning
Pressm.
53
To Next Page
Loading...
