Copying still images from a mini DV tape - Photo save
To cancel copying
Press MENU.
When the memory of the "Memory Stick" is full
"MEMORY FULL" appears on tile LCD screen or in tile viewfinder, and tile copying
stops. Insert another "Memory Stick" and repeat tile procedure from step 2.
When the access lamp is lit or flashing
Never shake or strike your camcorder. Also, clo not turn tile power off, eject tile
"Memory Stick" or remove tile hattery pack. Otherwise, tile image data breakdown may
OCCUI',
To record all the images recorded on the mini DV tape
Rewind tile tape all tile way hack and start copying.
If the write-protect tab on the "Memory Stick" is set to LOCK
"NOT READY" appears when you select tile item in tile menu settings.
When you change the "Memory Stick" in the middle of copying
Your camcorder resmnes copying from the last image recorded on tile previous
"Memory Stick."
o
©
131
To Next Page
Loading...
