Identifying the parts and controls
To prepare the Remote Commander
Insert two size AA (R6) batteries by matching tile + and polarities on tile batteries to
tile + marks inside tile battery compartment.
Notes on the Remote Commander
• Point the remote sensor away fl'om strong light sources such as direct sunlight or
overhead lighting. Otherwise, tile Remote Commander may not function properly.
• Your camcorder works in tile commander mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in tile commander mode VTR 2, we
recommend changing the commander mode or covering tile sensor of tile VCR with
black paper.
[]
D'OD'OOmin
J k
[]
[]
[] Remaining battery time indicator
(p. lO)/Tape counter (p. 63)/Memory
counter (p. 133)/Time code indicator
(p. 21)/Self-diagnosis indicator (p. 152)
[] FULL charge indicator (p. 10)
[] Remianing battery indicator (p. 10)
168
To Next Page
