-- Playback - Basics --
Playing back a tape
You can monitor tile playback picture on tile LCD screen. If you close tile LCD panel,
you can monitor tile playback picture in tile viewfinder. You can also control playback
using tile Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button. The
video control buttons light up.
(3) Slide OPEN in the direction of the • mark to open the LCD panel.
(4) Press _ to rewind the tape.
(5) Press _ to start playback.
(6) To adjust the volume, press either of the VOLUME +/ buttons.
REW e_} PLAY
2
3 1
To stop playback
Press ll.
26
To Next Page
Loading...
