6(E)
Meaning of ® and r symbols
® : Functions in lines with the ® symbol are
available when the option board for that column is
installed.
r : Functions in lines with the r symbol are
available when two or more option boards or the
BKDM-7031/7041 board are installed.
Functions
Basic
system
a)
3-D linear transform
10-bit 4:2:2:4 signal
processing
®
Video defocus ®
Interpolation in units of
frames
®
®
Border,crop
®
Posterization, mosaic,
sepia
®
Drop shadow (linear) ®
*Multi-point interpolation
®
*Video defocus black
cancel
®
BKDM-
3060
BKDM-
3050
BKDM-
3040
BKDM-
3030
BKDM-
7060
b)
BKDM-
7070
b)
Overview
Drop shadow (non-
overlap, non-linear)
c)
Non-linear effects
Drop shadow (overlap,
non-linear)
c)
Color mix
Spot lighting
®
®
r
(BKDM-
7031 also
required.)
r
r
r
®
®
*Video focus mask
®
Color grabber
r
(BKDM-
7041 also
required.)
r
(BKDM-
7041 also
required.)
a) A basic system consists of the DME-3000/7000, the
BKDM-3010 Control Panel, and the BKDM-302× or the
BKDM-7020 Input/Output Board.
b) The BKDM-7060/7070 can be used in the DME-7000
only.
c) Overlap non-linear refers to a non-linear effect in which
an input video image overlaps a copy of itself in the
process of transformation. The sphere, cylinder, page
turn and roll effects of the DME-3000/7000 are overlap
non-linear effects. All other non-linear effects are non-
overlap non-linear effects.
Functions Provided by Option Boards
The table below shows the functions made available
when option boards are installed in the basic system.
The “basic system” in the table means the
configuration shown within the dotted lines in the
illustration on the previous page.
Functions provided by option boards (The functions with* (asterisk) can be used in the DME-7000 only.)
Digital Sparkle effects
Digital Sketch effects
(Continued)
BKDM-
7021
To Next Page
Loading...
