RadarW
Mode CAMERA
Subject Not required
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 58 to 5D, 68
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Adjusting method:
Order Page Address Data Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 6-14)
2 6 94 16
3 6 95 81
46 016D
Press PAUSE button.
(Note 2)
56 02
Check the data changes to
“01”.
6 6 01 00 Press PAUSE button.
Note 2: The adjustment data will be automatically input to page:
F, address: 58 to 5D and 68.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 94 00
3 6 95 00
4
Release the data setting
performed at step 1.
(Refer to page 6-14)
To Next Page
Loading...
