Sony DSC-F717 - CAMERA SECTION ADJUSTMENTS

DSC-F717
6-3
COVER
COVER
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
Name
Filter for color temperature correction (C14)
Pattern box PTB-450
Color bar chart for pattern box
Adjusting remote commander (RM-95 upgraded).
(Note 1)
Siemens star chart
Clear chart for pattern box
CPC-12 jig
Minipattern box
Parts Code
J-6080-058-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-436-A
J-6082-353-B
Usage
Auto white balance adjustment/check
White balance adjustment/check
For checking the flange back
For connecting the adjusting remote commander
For adjusting the LCD, EVF block
J-10 Extension cable (39 P, 0.3 mm) J-6082-448-A
For extension between the CD-408 board (CN301) and
the SY-080 board (CN101)
J-11 Extension cable (39 P, 0.3 mm) 1-686-180-11
For extension between the SY-080 board (CN701, 702)
and the FR-194 board (CN301, 302)
For adjusting the flange back
J-9 Back ground paper J-2501-130-A For adjusting the strobe
6-1. CAMERA SECTION ADJUSTMENTS
1-1. PREPARATIONS BEFORE ADJUSTMENTS
1-1-1. List of Service Tools
• Oscilloscope • Color monitor • Vectorscope
• Regulated power supply • Digital voltmeter • Frequency counter
• Calculating machine capable of calculating hexadecimal numbers.
Note 1: If the micro processor IC in the adjusting remote
commander is not the new micro processor (UPD7503G-
C56-12), The pages cannot be switched. In this case,
replace with the new micro processor (8-759-148-35).
Fig. 6-1-1
J-1 J-5J-2
J-6 J-7
J-3 J-4
J-8 J-9 J-10
J-11