Sony G3313 - Page 182

Status Released
To give your device a name
1
Make sure that the Bluetooth
®
function is turned on.
2
From your Home screen [preference_title_home_wallpaper] , tap ID: ICN-SONY-HOME-APPTRAY-
NORMAL .
3
Find and tap Settings [settings_label_launcher] > Bluetooth [bluetooth_quick_toggle_title] .
4
Tap ID: ICN-SONY-KEY-MENU > Rename this device [bluetooth_rename_device] .
5
Enter a name for your device.
6
Tap RENAME [rename_capital] .
GUID GUID-6063BF5D-7D27-470A-9C86-B630131B6B08
Title To enter a device name
Changes Editorial comment implemented
Version 15
Author DoraM
Status Released
Pairing with another Bluetooth
®
device
When you pair your device with another device, you can for example connect your
device to a Bluetooth
®
headset or a Bluetooth
®
car kit, and use these other devices
to share music.
Once you pair your device with another Bluetooth
®
device, your device remembers
this pairing. When pairing your device with a Bluetooth
®
device for the first time, you
may need to enter a passcode. Your device will automatically try the generic
passcode 0000. If this does not work, refer to the user guide for your Bluetooth
®
device to get the device passcode. You do not need to re-enter the passcode the
next time you connect to a previously paired Bluetooth
®
device.
Some Bluetooth
®
devices, for example, most Bluetooth
®
headsets, require you to both pair
and connect with the other device.
You can pair your device with several Bluetooth
®
devices, but you can only connect to one
Bluetooth
®
profile at the same time.
GUID GUID-C4D7D6FB-1BD3-4C5E-A7FF-5BFE54EDDF0A
Title Pairing with another Bluetooth device
Changes For Lavender - implementing changes according to ED comments
Version 8
Author SzilviaM
Status Released
To pair your device with another Bluetooth
®
device
1
Make sure that the device you want to pair with has the Bluetooth
®
function
activated and is visible to other Bluetooth
®
devices.
2
From your device’s Home screen [preference_title_home_wallpaper] , tap
ID: ICN-SONY-HOME-
APPTRAY-NORMAL .
3
Find and tap Settings [settings_label_launcher] > Bluetooth [bluetooth_quick_toggle_title] .
4
Tap the Bluetooth [bluetooth_quick_toggle_title] slider to enable the function. A list of the
available Bluetooth
®
devices appears.
5
Tap the Bluetooth
®
device that you want to pair with.
6
Enter a passcode, if required, or confirm the same passcode on both devices.
GUID
GUID-226704F7-A3B0-4FE9-A592-EB43A40DAA56
Title To pair your device with another Bluetooth device
Changes For Kugo - label/icon corrections
Version 14
Author SzilviaM
182
This is an internet version of this publication. © Print only for private use.