EasyManuals Logo

Sony HAP-S1 User Manual

Sony HAP-S1
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
1. Select [Settings] – [Audio Settings] from the Home screen.
2. Select [DSEE].
3. Select [Auto].
The DSEE function automatically works for compressed audio sources and PCM audio
sources with lossless compression. The DSEE lamp lights up while the DSEE function is
active.
Note
You cannot set the DSEE HX function and the DSEE function concurrently to [Auto]. Setting
the DSEE function to [Auto] changes the DSEE HX function setting to [Off].
Hint
You can also set this function using the Playback Options menu during playback.
Using the Tone Control Bypass function (Tone Control
Bypass)
When the Tone Control Bypass function is set to [On], the Tone Control function is disabled and
you can listen to the original sound as it is.
When this function is set to [Off] (factory default setting), the playback sound is output with the
bass and treble set by the Tone Control function.
1. Select [Settings] - [Audio Settings] from the Home screen.
2. Select [Tone Control Bypass].
3. Select [On].
Hint
You can also set this function using the Playback Options menu during playback.
Using the Tone Control function (Tone Control)

Other manuals for Sony HAP-S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HAP-S1 and is the answer not in the manual?

Sony HAP-S1 Specifications

General IconGeneral
Product colorSilver
Audio formats supportedAAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance16 Ω
Frequency range10 - 100000 Hz
Audio output channels2.0 channels
Signal-to-Noise Ratio (SNR)100 dB
Channels quantity2 channels
Wi-FiYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Automatic synchronizationYou don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media typeHDD
Total storage capacity500 GB
HDCPNo
Headphone outputs1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Display diagonal4.3 \
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight- g

Related product manuals