EasyManuals Logo

Sony HAP-S1 User Manual

Sony HAP-S1
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
Only 2ch tracks are supported in any of the playable file formats. Tracks other than 2ch
tracks cannot be played.
DRM (Digital Rights Management)-protected music files cannot be played.
Confirm the audio file formats that can be played.
If the HDD AUDIO PLAYER is being used with a television, speakers, video deck or tape
deck and is placed too close to that equipment, noise may result.
Audio formats other than LPCM 2ch cannot be played through the OPTICAL IN or COAXIAL
IN jacks.
The HDD AUDIO PLAYER does not output a signal through the D/A DIRECTLINE OUT
jacks when [LINE IN 1] or [LINE IN 2] is selected in the [External Input] menu.
If you are using an external hard disk drive, skipping may occur in the playback sound
depending on the hard disk performance.
The HDD AUDIO PLAYER receives transferred files and analyzes music files at the same
time. Start playback after the icon disappears from the display.
When no sound is output from one side or both sides of the headphones, fully insert the plug
of the headphones.
There is severe humming or noise.
Check whether the cords or cables are broken or have any other defects.
Check that the speakers are connected to the HDD AUDIO PLAYER correctly.
Check that the connecting cords are not near a transformer, motor, TV set or fluorescent
light.
Move your TV away from the HDD AUDIO PLAYER and other audio equipment.
The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
Cannot play tracks.
The following tracks appear in gray and cannot be played:
Tracks that are not 2ch, even if the file extension is supported by the HDD AUDIO PLAYER.
Tracks that are identified as unplayable tracks by the HDD AUDIO PLAYER.
Tracks cannot be played if the music files are corrupted or the HDD AUDIO PLAYER fails to
read the data because of vibration.
Tracks with added will not be played, as these tracks are not entered in the Play Queue.
For example, when you listen to all tracks in an album, tracks with will not be included in

Other manuals for Sony HAP-S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HAP-S1 and is the answer not in the manual?

Sony HAP-S1 Specifications

General IconGeneral
Product colorSilver
Audio formats supportedAAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance16 Ω
Frequency range10 - 100000 Hz
Audio output channels2.0 channels
Signal-to-Noise Ratio (SNR)100 dB
Channels quantity2 channels
Wi-FiYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Automatic synchronizationYou don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media typeHDD
Total storage capacity500 GB
HDCPNo
Headphone outputs1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Display diagonal4.3 \
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight- g

Related product manuals