Sony HAP-S1 User Manual

the playback of that album. If you want to play a file with , select the track from the list
directly.
Music files of a length of 2 seconds or less cannot be played back.
Some tracks are not displayed.
If you add to tracks you dislike, the tracks are not displayed in the Play Queue.
If tracks in a format that is not supported by the HDD AUDIO PLAYER are transferred
without using HAP Music Transfer or the HDD Audio Remote application installed on your
smartphone or tablet, these tracks are not displayed.
Playback stopped.
If you remove the external hard disk drive from the HDD AUDIO PLAYER during playback,
the playback is stopped.
If the currently playing audio file is deleted via the network during playback, the playback is
stopped.
If you change the favorite status of the currently playing track to , the playback is stopped.
If you delete a track, album, or folder while playing, playback will be stopped. Playback will
also be stopped if you delete a different track, album, or folder than the track currently
playing.
Tracks belonging to the same album are registered to
different albums.
The album name or album artist name embedded in the music files are different.
Select the target albums with HDD Audio Remote, and then edit the album name and album artist
name of the tracks so they are the same. (For details on how to edit the information, refer to the Help
of HDD Audio Remote.)
Edit the album name and album artist name of all music files you want to include together in same
album so they are the same using music file management software on your computer, and then
transfer (*) those music files to the HDD AUDIO PLAYER.

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g