5. Select [Manual registration].
An input space for the network name (SSID) appears on the screen.
6. When the input space for the network name (SSID) is surrounded by a white box, push the
jog dial in.
An editing display and keyboard appear.
7. Enter the network name (SSID).
For details on how to use the keyboard, see “How to input characters.”
8. When the network name (SSID) is entered, select [Next].
9. Select the security mode of your wireless LAN router/access point from [None], [WEP],
[WPA/WPA2-PSK] or [WPA2-PSK] on the security mode selection screen.
10. If you want to set up a security key, enter the security key (WEP/WPA) and then select
[Next].
Perform the same operations as step 7 to enter the security key (WEP/WPA).
11. Select either [Auto] or [Custom] on the selection screen for the IP address setup method.
12. Follow the instructions that appear in the display to set up the connection.
Note
You can enter a maximum of 32 alphanumeric characters and/or symbols for a network
name (SSID).
If the security mode of your wireless LAN router/access point is not included in the options in
step 9, change the security configuration of the router.
You can enter 5, 13 or 26 alphanumeric characters and/or symbols for a WEP key or 8 to 63
alphanumeric characters and/or symbols for a WPA key.
[34] Wi-Fi network connections (wireless LAN)
Method 4. Setting up a network connection using the
(WPS) PIN code configuration method
You can set up a connection by entering the (WPS) PIN (Personal Identification Number) code
of the HDD AUDIO PLAYER into the wireless LAN router/access point to authenticate the
connection between the devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
