Sony IT-A100 - Handling the Phone

EE Other information
en
Precautions
OT am eloh (1 a-volulga=
© Operate the unit only on 12V DC. Use the AC power adaptor
supplied with the unit. Do not use any other AC power adaptors as
they may cause malfunction.
¢ Plug the unit into an AC outlet that has a continuous power supply.
Avoid outlets where power may be cut off.
folamlarieclitchatelal
Do not expose the unit to:
heat sources such as radiators or air ducts.
© extremely low temperatures.
¢ direct sunlight.
¢ moisture or rain.
¢ mechanical vibration or shock.
¢ inclined position.
devices (such as speakers or TVs) which contain magnets or
generate magnetic fields.
Ola manr:liaht-arelera=
@ Cleaning the cabinet
Clean the cabinet with a soft cloth slightly moistened with water
or a mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine as they may damage the finish of the
cabinet.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
~ Consult the dealer or an experienced radio/TV technician for help.
Handling the phone |