55
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-40S3000 ONLY
1. Apply Sheet Core C to edge of Panel to
cover sharp edge of panel.
Use ribs on bezel (w/o screw boss) as a
guide to center tape.
2. Dress split (H3 & H4) in harness under
Cushion D Tape.
3. Route H3 and H4 harness as shown.
OPERATION PROCESS
Use rib on bezel as reference
to center Sheet Core C when applying
to panel edge.
Use UL Tapes as Reference to
position Harness over panel,
1
2
3
Use H3/H4 Harness "Split" as reference
for top of Cushion D Position
(under Cushion D)
Use panel edge to align Himelon Tape.
H4-Bd Cable
H3 BOARD HARNESS
To Next Page
Loading...
Need help?
General