Operating Instructions
Illll
Auto Program Perform Auto Program whenever setting up your TV.
Auto Program will search for available channels and program receivable channels.
Channel Use this feature after you run Auto Program to skip unwanted channels or add
Skip/Add new ones.
1 Use the _) or '_"buttons to highlight the position of the desired channel, then
press CE).
2 Use the '_ or '_ buttons to highlight Skip or Add, then press (2!D.
3 Press <_to returnto the Channel menu or press _ to exit.
1 Press (:E), then use the 0 or '_"buttons until you reach the desired channel
number.
Channel
Label
Label up to 40
channels with
their call letters
2 Press C£3 to activate the channel.
3 Press 0 to highlight Label, then press GD. Use the 0 or 0 buttons to display
the first call letter or number of the label. Press CE) to select. Repeat this
process until you finish selecting all the call letters.
4 When f'mishcd, press <3_ to activate.
5 Press <_to return to the Channel menu or press c::9 to exit.
34
To Next Page
Loading...
