Using the Menus
Using the Channel Menu
To access the Channel menu, use the following steps:
To Display To Highlight _i To Select
MENU
Press '_ to highlight an option; then press OD.
m[ -_ll
Favorite 1 Use the '_ or '_ buttons to highiight the position (i"Si where you want toseia
Channels favorite channel, then press OD.
Quick access 2 Use the '3 or _" buttons to fmd the channel you want to add to your favorite
tofavorite channels.
channels 3 Press (2D to select the channel. The "IV will automatically change to the
selected channel.
4 Press _ to returnto the Channel menu or press _ to exit.
Touse Fayotite€_n_Isi ex_a!l menusand pressCaD. Pres__:0 _ _e _he _i:to ire
desiredchannelnumbe_and presscD.
Cable Use the _ or _" buttons to highlight one of the following options, then press CE) to
select it.
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
On:
Off:
Channel Fix Use the _ or _" buttons tOhighlight one of the foiiowing options, then press _ ......
to select it.
Off:
Channel Fix is not set.
2-6:
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
AUX 2-6:
Video 1:
Select this setting instead of 2-6 if you want to change channels
using a cable box, VCR, or satellite receiver and you've connected it
to the AUX input.
Select from available video inputs when you have connected video
equipment (e.g., a satellite receiver) and you want your TV fixed to it.
33
To Next Page
Loading...
