Operating instructions
Using Picture in Picture (PIP)
The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in
the full size "main" picture and one in a small "window" picture.
Displaying Picture in Picture
Indicates which
picture, is currently
receiving
Main the main picture
of the window
picture
picture
TousePIP
1 Press the TV button to control PIP with the yellow buttons. Tune your TV to a channel that
you know is currently airing programming.
F_
2 Press (_ to display the window picture.
3 Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture.
2
3
4
5
Tocheck your PIP
1 Press the TV button to control PIP with the yellow buttons. Tune your TV to a channel,
which Vou know is currently airing programming.
_P SWAP
Press (_) to turn PIP on, then press (_. The channel from the main window should now
appear in the window picture.
Use the (CH +/-) buttons on the bottom of your remote control to select the same channel
in the main picture.
Use the yellow PIP (CH +/-) buttons to change the channel in the PIP window picture.
wa_o
Press the yellow (_) PIP button to switch the PIP window to other video inputs for other
equipment that is connected to any of the VIDEO IN jacks of your TV. You should see a
different picture in your PIP window for each piece of connected video equipment. Make
sure the connected equipment is turned on and working when you perform this test.
26
To Next Page
Loading...
