Operating Instructions
Remote Control
Problem Possible Remedies
I cannot operate the o Press TV (FUNCTION) when operating your TV.
remote control o Check the orientation of the batteries.
O Batteries could be weak. Replace them (page 2).
Q Move the TV three to four feet away from fluorescent lights.
I cannot change 0 Make sure you have not inadvertently switched your TV from the
channels with the channel 3 or 4 setting if you are using another device to change
remote control channels.
If you are using another device to control channels, be sure that
you have pressed the FUNCTION button for that device. For
example, if you are using your VCR to control channels, be sure to
press the VCR/DVD FUNCTION button (page 4).
I lost the remote O You can use the front panel controls to access your menus, change
control channels, adjust the volume, or change video inputs (page 2).
Contact your nearest Sony Dealer to order a replacement, please
call our Sony Direct Accessory and Part Center at 1-800-488-7669
(U.S. residents only).
Programming The Remote Control
Problem Possible Remedies
More than one code 0 Try entering them one by one until you come to the correct code
is listed for your component.
Ientered the wrong O If you enter a new code number, the code number you previously
code number entered at that setting is erased.
I cannot operate a _ Use the component's own remote control.
component with the
remote control
When I changed the _1 You must reprogram the remote control
batteries, the code
numbers changed
back to the factory
settings
46
To Next Page
Loading...
