Operating Instructions
Channels
Problem
i cannot receive
higher number
channels (UHF) when
using an antenna
Possible Remedies
0 Make sure Cable is set to Off in the Channel menu (page 33)i
O Perform Auto Program to add channels that are not presently in
the memory (page 23).
Cable stations don't UI Make sure Cable is set to On in the Channel menu (page 33),
seem to work _ Perform Auto Program to add channels that are not presently in
the memory (page 23).
I cannot get anything O Besure that you did not setthe video in the Setup menu (page 42)
but TV to skip your video inputs. If a video input has been set to Skip, it
will be skipped when you press the TV/Video buttons for either
the main or PIP pictures.
Picture in Picture (PIP)
Probiem .... Possible Remedies ......................
The remote control _ Press the TV FUNCTION button. You may have inadvertendy
doesn't work in PIP pressed the VCR/DVD FUNCTION button, which changes the
mode PIP buttons to VCR mode (page 26).
There is no window ui Be sure your PIP window picture is set to a video source/channel
picture or it is just that has a program airing,
static Q You may be tuned to a video input with nothing connected to it.
Try cycling through your video inputs using the yellow PIP IV/
VIDEO button with the red dot (page 26).
I get the same _ Both may be set to the same channel. Try changing channels in
program in the either the main picture or the window picture (page 26).
window picture as in D Your TV may be set up to select all your channels through a cable
the main picture box. The cable box will only unscramble one signal at a time, so
you cannot use the PIP feature. If possible, run a direct cable to the
VHF/UHF jack on your IV. This will only work if your cable
system provides an unscrambled signal (page 13).
I cannot see VIDEO Q Connected equipment in VIDEO 4-5 (Y, Pb, Pr) is not visible ha PIE.
4-5 (Y, Pb, Pr) in PiP
ContactingSony
Before calling our Customer Information Services Center, please have ready your TV's serial number. It is located on
the rear of your TV or on the front cover of this manual The person attending to your caIIwill ask you for it.
Our Customer Information Services Center phone number is 1-800-222-SONY (7669) (US residents only) or (416) 499-
SONY (7669) (Canadian residents only).
48
To Next Page
Loading...
