HCD-SHAKE99/HCDSHAKE100
6
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note 1: After the side (L, R) panel assy and top panel is removed, this word is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
CD/DVD drive
tray
Insert the clip etc.
processed to the
length of 8 cm or
more in the hole
on the side of the
chassis and push.
8 cm or more
hole
– Side view –
2 Insert the clip etc.
– Top view –
Note:
Push after it inserts it in this hole well.
3
tra
1 Remove the side (L, R) panel assy and top panel.
(Illustration of disassembly is omitted.)
CAPACITOR DISCHARGE FOR ELECTRIC SHOCK PREVENTION
Switching Regulator Board (Conductor side view)
In checking the Switching regulator board, make 1 capacitor discharge (C523) and 2 connectors (CN201 and CN401) for eletrical shock
prevention.
CN401
C523
CN201
Step 2: Discharge Pin1 & Pin4
Step 1: Discharge C523
Step 5: Discharge Pin1 & Pin3
Step 3: Discharge Pin3 & Pin9
Step 4: Discharge Pin5 & Pin7
800 :/5 W
800 :/5 W
R
R
R
R
R
800 :/5 W
800 :/5 W
800 :/5 W
Ver. 1.1
To Next Page
Loading...
