Sony SLV-340 - Page 11

OS ttet epetee iret
Hookup 2: VCR setup
1 Set the RF UNIT switch to CH 3 (channel 3) or CH 4
(channel 4), whichever channel is not used in your
area. If both are used, set the switch to either channel.
If you made A/V connections (from page 7), you can
skip this step.
RF UNIT
For details, see page 35.
2 (Canadian model only) Set the on-screen display
language to French if desired. For details, see page 17.
3 Set NORM/CATV to CATV:
Set CATV/NORMAL to
CATV and press EXECUTE.
Press MENU and select
TUNER PRESET.
CH1
NORM ¢CATV
*ADD ERASE
2ON OFF
MENU
TUNER PRESET
»NORM/CATV
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
TIMER SET/CHECK
® TUNER PRESET
CLOCK SET
For details, see page 18.
4 Preset the channels into the VCR:
Select AUTO PRESET and
press EXECUTE.
Press MENU and select
TUNER PRESET.
MENU TUNER PRESET CH1
TIMER SET/CHECK NORM/CATV NORM CATV
® TUNER PRESET » AUTO PRESET
CLOCK SET MANUAL SET *ADD ERASE
*ON OFF
AFT
FINE TUNING
wh dh dy
——™ PLEASE WAIT =—
ca ~
For details, see page 19.
You are now ready to use your VCR
A Quick reference to operations is provided on the
back cover to help you quickly enjoy the basic
functions. These procedures differ slightly depending
on the hookup used. Make a note of which hookup you
used (Hookup 2) so that you can always follow the
correct instructions.
Getting Started | 47 -EN
parezs 6uiy305